\documentclass{article}

\usepackage{geometry}
\usepackage{hyperref}
\usepackage{pgfplots}
\usepackage{tikz}
\usepackage{minted}
\usepackage{booktabs}
\usepackage{siunitx}
\usepackage{algorithm2e}
\usepackage{float}
\usepackage{caption}
\usepackage{subcaption}

\geometry{a4paper}

\begin{document}

\begin{center}
    \Huge
    Sorting in x86\_64 Linux Assembly
    \vspace{1cm}

    \Large
    Navid S.

    \vspace{0.5cm}
    Andreas K. L.

    \vspace{0.5cm}
    Mikkel T.

    \vspace{1cm}
    \large
    October 31$^\text{st}$ 2025
\end{center}

\newpage
\tableofcontents
\newpage

\section{Introduction}
Sorting is one of the most fundamental operations in programming. Sorting
algorithms play a crucial role in efficient searching, organization,
interpretation of data, and optimization problems. Furthermore, sorting is often
times the first step towards designing complicated algorithms in computer
science. This project aims to study efficient sorting of a list of coordinates,
when sorting by the second coordinate. This will be done solely in
\textit{x86\_64 Linux Assembly}. Although abstract high level languages such as
\textit{Python} and \textit{Java} allow faster and convenient development,
Assembly provides precise control over program flow, memory usage and
instruction level execution, making Assembly an excellent environment for
benchmarking and performance analysis.

Two sorting algorithms quicksort and insertionsort will be implemented and
compared against each other. Quicksort is expected to excel on large random
datasets, while insertionsort is more suitable for small or nearly sorted
cases. Several test instances consisting of uniformly random coordinates will be
created with the goal of comparing the implementations actual runtime to their
theoretical runtimes and evaluate each implementation.

\section{Design}

\subsection{Input and Output format}
Each line contains one and only one coordinate consisting of two values
formatted as \texttt{$\langle$x$\rangle$\textbackslash
t$\langle$y$\rangle$\textbackslash n}, where \texttt{x} and \texttt{y} are
non-negative integers in the range 0 to 32767. Although limiting, this range is
a design decision taken in order to avoid unnecessary complexity and keep focus
on the main objective of the project, efficient sorting. Including negative
numbers would for example require extra logic for parsing, comparison,
converting back and forth to ASCII, and allocating memory. Both input and output
follow this strict format.

\subsection{Selection of different algorithms}
The ability to choose which algorithm to use can be quite beneficial, if you
know certain aspects about your data. For that reason, and beause it makes
testing different algorithms easiers, the program will be able to run with
different algorithms passed as arguments.

\subsection{Format when sorting}
In order to be a little more general, and make our program easily expandable to
different types of data, we wanted to create our own array datatype, that
allows us to sort something more abstract, with respect to a key in that
abstract object. To do this we settled on an array of memory addresses, that
point to where the abstract objects are, see \autoref{fig:array}. These objects
would in practice also be represented as arrays. With this we can specify which
index (key) in the sub-arrays we want to sort by, and then when we swap elements
in the array, we simply swap the memory addresses around. 

\begin{figure}[H]
    \centering
    \begin{tikzpicture}
        \draw (0,0) rectangle (4,1); % outer box
        \node at (-0.5,0.5) {$A=$};

        % vertical dividers
        \draw (1,0) -- (1,1);
        \draw (2,0) -- (2,1);
        \draw (3,0) -- (3,1);
        \node at (0.5,0.5) {$p_1$};
        \node at (1.5,0.5) {$p_2$};
        \node at (2.5,0.5) {$\cdots$};
        \node at (3.5,0.5) {$p_n$};

        \draw (0.1,2) rectangle (0.8,5);
        \node at (0.5,2.5) {$e_{11}$};
        \node at (0.45,3.6) {$\vdots$};
        \node at (0.5,4.5) {$e_{1m}$};

        \draw (1.1,2) rectangle (1.8,5);
        \node at (1.5,2.5) {$e_{21}$};
        \node at (1.45,3.6) {$\vdots$};
        \node at (1.5,4.5) {$e_{2m}$};

        \draw (3.1,2) rectangle (3.8,5);
        \node at (3.5,2.5) {$e_{n1}$};
        \node at (3.45,3.6) {$\vdots$};
        \node at (3.5,4.5) {$e_{nm}$};

        \draw[->] (0.5,1.1) -- (0.5,1.9);
        \draw[->] (1.5,1.1) -- (1.5,1.9);
        \draw[->] (3.5,1.1) -- (3.5,1.9);
    \end{tikzpicture}
    \caption{The format of the array $A$, where $p_n$ is the $n^\text{th}$
    memory address, pointing to an array where $e_{nm}$ is the $m^\text{th}$
    element of the $n^\text{th}$ array in $A$.}
    \label{fig:array}
\end{figure}

\subsection{Program Flow}
The program is structured into four main phases: selecting an algorithm,
converting the inputfile to the array format, sorting that arrau, and printing
the array to stdout. Each phase is designed to handle a specific task, which
creates modularity and clarity. Within each phase a set of functions manage the
corresponding operations, allowing the programmer to focus on one task at a
time. This design also greatly supports debugging by simplifying tracking and
solving errors. Below is a flowchart visualizing each step, followed by a short
summary of the design.

\begin{figure}[H]
    \centering
    \includegraphics[width=\linewidth]{design.drawio.png}
    \caption{Program flow}
    \label{fig:flowchart}
\end{figure}

\textbf{Select Algorithm:} Th

\textbf{Parsing the data:} Next, the received file is to be parsed, meaning that
only useful data will be extracted. This process omits the tabs, and newlines,
which in turn significantly simplifies iteration through the data, by ensuring
that only 8-byte coordinates are left. Lastly an important design choice has
been creating an array of pointers to each coordinate pair. This design is
explained in further detail later. All of this logic has been wrapped in a
function \textit{make\_array\_from\_file}, which utilizes several smaller helper
functions to perform this parsing process.

\textbf{Sorting:} After parsing, a sorting algorithm of choice can be used on
the coordinates. The currently implemented sorting algorithms are quick-sort and
insertion-sort. Both algorithms have been designed to allow sorting both on the
x-coordinate and the y-coordinate. This is easily achievable because of the
array of pointers. The chosen algorithm can be passed as a command line
argument, otherwise a default algorithm will be run. This design where an
algorithm can be passed to the sorting function, allows the programmed to be
extended with new algorithms if needed.

\textbf{Generating output:} A side effect of the
\textit{make\_array\_from\_file} is converting ASCII characters to 8-byte
integers. This allows the sorting algorithm to make numeric comparisons on the
data. But this also means that the data should be converted back to ASCII,
before printing the output. 

\section{Implementation}
This four phase design has been converted into Assembly code using the x86\_64
instruction set. Furthermore the design has been split up in modules, where each
module is a collection of closely related functions. For example
\textit{array\_maker.s} contains functions meant to parse data. All functions in
this program follow the x86 calling conventions, with a few exceptions where all
registers are preserved. Below is a detailed explanation of some of the more
interesting functions.

\subsection{Insertion-sort}
This is a classic implementation of the iterative insertion-sort. The function
takes three arguments: address of the array of pointers to each coordinate,
number of coordinates and which coordinate dimension to sort by. The first step
of this algorithm is to check the number of coordinates with a compare
statement, if n $\le$ 1, the array is already sorted and nothing should be done.
Otherwise the algorithm initializes two indices i and j, representing the outer
and inner loop in insertion-sort. A snippet of the algorithm is seen below.

\begin{algorithm}[H]
\caption{Insertion-sort inner Loop}
\SetAlgoNoLine
\SetKw{KwCmp}{cmpq}
\SetKw{KwJl}{jl}
\SetKw{KwMov}{movq}
\SetKw{KwJge}{jge}
\SetKw{KwDec}{decq}
\SetKw{KwJmp}{jmp}

\textbf{inner\_loop:} \\
\KwCmp{$0$, \%r14} \tcp*[r]{if j < 0 stop and insert the key}
\KwJl insert\_key \\

\KwMov{$(\%rdi, \%r14, 8)$, \%r10} \tcp*[r]{pointer to key → r10}
\KwMov{$(\%r10, \%rdx, 8)$, \%r11} \tcp*[r]{key → r11}

\KwCmp{\%r11, \%r9} \\
\KwJge insert\_key \tcp*[r]{if A[i] >= A[j] stop}

\KwMov{\%r10, $8(\%rdi, \%r14, 8)$} \tcp*[r]{A[j+1] = pointer to key of j}

\KwDec{\%r14} \tcp*[r]{move to j - 1}
\KwJmp inner\_loop \\

\textbf{insert\_key:} \tcp*[r]{Insert the key here}

\end{algorithm}

The two registers R8 and R9 save the current index and value of "i" while R10
and R11 are used for "j". The formula for loading the value of an element consists of two steps:
firstly loading the pointer to the element, and secondly loading the actual value of this pointer. This
is a result of implementing an array of pointers to allow more flexibility, instead of directly using the array coordinates.
Lines 3 and 4 of the pseudo code demonstrate how this process is done. Each pointer is 8-bytes, therefore the correct pointer
is calculated by adding index * 8 to RDI, which stores the head of the pointer array. Next, because each value is also 8 bytes,
RDX * 8 to the pointer, where RDX is the coordinate dimension the algorithm uses to sort, can be used to retrieve the actual value of this pointer.
After loading the values, compare statements can be used to find the correct placement of each coordinate.
Like the standard insertion-sort, this implementation creates a sorted part on the left side of the array. Therefore
the first compare checks if A[i] is equal or bigger than A[j], if this is the case A[i] can not be smaller than any element
at j or before. Otherwise the algorithm keeps searching for the correct placement of A[i] in the sorted part by decreasing j and repeating
the inner loop. If j at some point hits 0, the element A[i] is the current smallest coordinate
and should be inserted there. This process continues until R15 which holds the index of "i" is greater than the number of coordinates.

\section{Evaluation}

To evaluate whether out program works, we created three \textit{shell scripts},
one for generating test data (\textit{generate\_test\_data.sh}), one for testing
the validity of the output of the program (\textit{test.sh}) and one for testing
the execution time of the program (\textit{benchmark.sh}).

The script that generates test files, generates files of size 0, 5000, 10000,
50000, 100000, 500000 and 1000000. (a size of 10, means the file consists of 10
coordinates). For each $n$ we also create three different kinds of test files.
One where all of the data is random, one where the data is already sorted, and
one where it is reversely sorted. This way we can see both the average case, and
worst case of any algorithm we decide to use. Now we can use our
\textit{test.sh} script, which runs the program with each of the generated test
files for all sorting algorithms of the program, and compares the output with
the output from the \textit{builtin} function \textit{sort}.

Given all of the tests pass, we can then run \textit{benchmark.sh}, which times
how long it takes for our program to run with each test file for each algorithm,
and saves the result in a \textit{csv} file. The results of this \textit{csv}
file is shown 

\begin{figure}[H]
    \centering
    \begin{tikzpicture}
        \begin{axis}[
                xlabel={size({$n$})},
                ylabel={seconds},
                ymode=log,
                % xmode=log,
                width=\textwidth,
                legend pos=north west,
                clip mode=individual,
                scatter/classes={
                    isort_random={mark=*,red},
                    isort_reverse={mark=*,green},
                    isort_sorted={mark=*,blue},
                    qsort_random={mark=*,cyan},
                    qsort_reverse={mark=*,magenta},
                    qsort_sorted={mark=*,yellow}
                }
            ]

        % -- Scatter plot --
        \addplot[scatter, only marks, scatter src=explicit symbolic] table 
            [x=size, y=time, meta=type, col sep=comma]
            {../test/benchmark_results.csv};
        \legend{isort\_random, isort\_reverse, isort\_sorted, qsort\_random,
            qsort\_reverse, qsort\_sorted}

        % -- O(n)
        \addplot[domain=1:92709, samples=100, thick, densely dotted, black]
          {(x * 1/18000000+0.0003)};
        \addlegendentry{$\mathcal O(n)$}

        % -- O(nlogn)
        \addplot[domain=1:92709, samples=100, thick, dotted, black]
          {(x*ln(x)) * 1/80000000 + 0.0003};
        \addlegendentry{$\mathcal O(n\log n)$}

        % -- O(n^2)
        \addplot[domain=1:92709, samples=100, thick, dashed, black]
          {(x*x) * 1/5000000000+0.0003};
        \addlegendentry{$\mathcal O(n^2)$}

      \end{axis}
    \end{tikzpicture}
    \caption{Benchmarking data from Insertionsort and Quicksort for both random,
    sorted and reverse sorted data.}\label{fig:benchmark}
\end{figure}


\section{Conclusion}
    
\end{document}
